Business Description

The production of outdoor LED floodlights pay more attention to the situation of water ingress, because LED floodlights are generally used in outdoor scenes and are easily affected by rainy weather. In fact, when LED floodlights are produced, they have already begun to pay attention to the water ingress, especially when it comes to the housing of LED floodlights. Next, follow the Sensor Led Street Light Housing Supplier to understand the key points and preventive measures for floodlight production.

1. Water seepage in screw holes is a place that manufacturers are prone to abrupt. There are several reasons for water seepage and water ingress here:

1. The quality of the shell causes the screw to slip (large hole, poor material);

2. Poor quality of screws causes screw heads;

3. The screw hole of the plug has a sharp edge, and the screw is not in place;

4. The contact surface of the plug and the shell has a sharp edge, and there is still a gap between the plug and the shell when the screw is locked;

5. When the screw is locked, the sealing ring of the plug is offset (due to the extrusion of the screw, the extrusion of the shell and the plug, etc.);

6. The torque of electric screwdriver is too small.

Assembly notes:

1. Before installing the sealing ring, check whether there is any crack on the contact surface of the plug and the shell and the screw hole, select the defective product and install the sealing ring. The sealing ring must be installed in place and the fixing glue is even and appropriate;

2. Self-inspection of screw-locking station and defective screw heads;

3. Confirm the screw torque and fix it before assembly.

The above content is organized and shared by LED Street Light Housing | Die-cast Aluminum Light Housing Manufacturer, hoping to help those in need.

• Reviews & Ratings
• Write a Review